Selve Tubular Motor SEE 2/15-NHK 15Nm

388352

• Tubular motor with NHK emergency manual override connection
• without radio control
• The escape route drive for added safety
• The SEE-NHK is an electronic roller shutter drive that can be conveniently operated via a wall switch or, in an emergency, by a hand crank in the event of a power failure
• Building on the SEE drive, the SEE-NHK combines the well-thought-out features of the SEE drive, such as simplest limit switch setting, maximum curtain protection and firm closing of the curtain, with maximum operating safety
• After the SEE-NHK drive has been cranked up manually, the drive automatically relearns the limit positions
  
• The freewheel installed between the crank and the articulated bearing ensures that the curtain can only be cranked in the correct direction, i.e. upwards. This ensures that the system is not damaged. When cranking in the wrong direction of rotation, the force is not transmitted by the freewheel
• Plug-and-play: Limit switch setting not required, even after emergency operation
• Obstacle detection in downward direction
• Learning overload protection in upward direction
• Anti-freeze protection
  
• Can only be used with rigid shaft connectors
• Outer diameter: 45 mm
• Suitable for: SW60
• Rated torque: 15 Nm
  
• Rated speed: 17 rpm
  
• Duty cycle: 4 min.
• Rated voltage: 230 V
• Traction force N: 460
• Gear ratio: 13:1
• Power consumption: 152 W
  
• Frequency: 50 Hz
• Current consumption: 0.66 A
• Connection cable: 4-core, 3m cable length
• Protection class: IP44
  
• Total length: 589 mm
  
• Made in Germany

Scope of delivery: 1 motor with connection cable