Selve tubular motor SEE 2/10-NHK 10Nm

388342

• Tubular motor with NHK emergency hand crank connection
• without radio
• The escape route drive for added safety
• The SEE-NHK is an electronic roller shutter drive that can be conveniently operated via wall switch or, in case of emergency during a power outage, via hand crank.
• Based on the SEE drive, the SEE-NHK combines the sophisticated features of the SEE drive, such as the simplest end position setting, maximum curtain protection and the secure closing of the curtain with maximum operating safety.
• After the SEE-NHK drive has been manually cranked upwards, the drive automatically relearns the end positions.
  
• The freewheel mechanism installed between the crank and the pivot bearing ensures that the blind can only be cranked in the correct direction, i.e., upwards. This prevents damage to the system. If the crank is turned in the wrong direction, the freewheel prevents the force from being transmitted.
• Plug-and-play: End position setting not required, even after emergency operation
• Downward obstacle detection
• Learning overload protection in upward direction
• Freeze protection
  
• Image similar (delivery without adapter, drive, bearing)
• Only usable with rigid shaft connectors
• Outer diameter: 45 mm
• Suitable for: SW60
• Rated torque: 10 Nm
  
• Rated speed: 17 rpm.
  
• Operating time: 4 min.
• Nominal voltage: 230 V
• Traction force N: 310
• Translation: 13:1
• Power consumption: 124 W
  
• Frequency: 50 Hz
• Current consumption: 0.55 A
• Connection cable: 4-core, 3m cable length
• Protection rating: IP44
  
• Total length: 564 mm
  
• Made in Germany

Scope of delivery: 1 motor with connection cable