Zamel Wireless Dimmer RDP-21

The RDP-21 dimmer can be used with traditional incandescent bulbs, halogen lamps, or lamps powered by an electric transformer. It can be used wirelessly with a transmitter and EXTA LIFE controller, or wired with a monostable or bistable switch. For traditional control, the IN input is used. Thanks to bidirectional communication, the dimmer's current status (ON/OFF status + brightness in %) can be monitored. In addition to the RDP-01 controller, it can also be controlled by transmitters from the EXTA LIFE system. Multiple transmitters can be programmed to a single receiver. Suitable for flush mounting in junction boxes. Software updates automatically. Programming the dimming time or setting minimum and maximum brightness levels expands the dimmer's functionality.

• The RDP-21 dimmer allows control of traditional incandescent bulbs, halogen lamps, and LED lights. The device displays the brightness level as a percentage. Users worldwide can adjust the brightness of light sources by changing the percentage.
• RDP-21 can be controlled by multiple transmitters simultaneously.
• Adjusting brightness to time of day
• RDP-21 enables automatic software updates. Thanks to this, automation never becomes outdated.
• Installation of flush-mounted box
• Power supply network
• Suitable for switches: Yes
• Suitable for pulse oximeters: Yes
• Suitable for dimmers: No
• Suitable for roller shutter switches: No
• Radio frequency 868.000 MHz
• Protection rating (IP) IP20
• Radio transmission, bidirectional - ISM 868 MHz (868.50 MHz)
• Radio transmission algorithm based on 128-bit key
• Optical indicator for radio transmission LED RGB
• Maximum number of transmitters: 96 pairs
• Function mode with EFC-01: switch on/off, adjust light intensity (slider), time delay, max. 4 favorite settings
• Protection class
• Reference standard PN-ETSI EN 300 220-1, PN-ETSI EN 300 220-2
• Operating modes for outdoor inputs: Power on to last saved level, Power on to 100% brightness, Brightness setting, Time delay
• Operating modes for external inputs: Power on to last saved level, Power on to 100% brightness, Power off, Time delay, Change of relay state causes change of output state
• Control element: 2 x MOSFET transistors
• Control type: “leading edge” – output switching on to “0”
• Supported loads: traditional 230 VAC incandescent and halogen lamps, selected dimmable LEDs, 12V lighting supplied with electronic (ELV) or magnetic (MLV) transformer
• Maximum load 250 W for R load – traditional incandescent and halogen lamps, 200 VA for RC and RL load – electronic transformers, 60 W dimmable LEDs
• Height 47.5 mm
• Width 47.5 mm
• Depth 20.0 mm

Scope of delivery: 1 piece