Crafted with care and unconditionally loved by our customers, this unmistakable bestseller exceeds all expectations.
Skip to product information
Becker Hazard Control Emergency Exit Set HCS520 20Nm
Hersteller: BECKER-Antriebe GmbH
FG Artikel Nummer:
300256
879,95€
Taxes included.
Shipping calculated at checkout.
Express Versand möglich
Abholung bei Fenstergigant möglich

Becker Hazard Control Emergency Exit Set HCS520 20Nm
4007 000 029 0
- The Becker HCS520 emergency exit door set is a complete kit for equipping doors or windows with motorized blinds that serve as a secondary escape route. Included in the kit are a DC motor (available with either 10 or 20 Nm torque), a battery, a control transformer unit, a switch, and motor mounts.
- In the event of a power outage, e.g. due to a fire, the blind automatically moves upwards.
- The set is connected to a standard 230V power supply and can be operated normally via a push button on site.
- Mechanical end position adjustment
- The motor detects whether the roller shutter is running into an obstacle or is blocked (e.g., by freezing) and switches off automatically without sustaining damage.
- Additional redundancy through mandatory safety switch
- Connection for central control, smoke detectors, etc.
- Control unit can be mounted in a flush-mounted electronics box or in a double cavity wall box.
- Battery can be purchased separately
-
Battery capacity: 3000 mAh
- Design: Mini (from SW 50)
- Rated torque: 20 Nm
- Rated speed: 17 rpm.
- Cable type: Rubber - S05RN-F 4x1 white (3 meters)
-
Operating voltage: 12 V/DC
- Nominal voltage control: 110-240 V AC / 50-60 Hz
- Current consumption: 4.6A
- Outer diameter: 45mm
- Motor protection rating: IP44
- Total length: 557 mm
- Made in Germany
Scope of delivery:
- 1 Becker DC tubular motor R20-17-M19 with connection cable (3 meters) , bearings, adapter and drive pin
- 1 DC controller HC520
- 1 x 3000 mAh battery
- 1 flush-mounted electronic box
- 1 push button
- 1 flush-mounted electronic box
