BECKER-Antriebe GmbH Rolladen Becker Rolladenmotor R12-17-E01 12Nm

Becker roller shutter motor R12-17-E01 12Nm

Hersteller: BECKER-Antriebe GmbH

FG Artikel Nummer: 300209

148,95€

Taxes included. Shipping calculated at checkout.

Express Versand möglich

Abholung bei Fenstergigant möglich

Becker roller shutter motor R12-17-E01

20101201400

Roller shutter motor without radio control
with blocking and obstacle detection
automatic end position detection
VDE certification
Smooth, quiet operation
Automatic curtain length compensation
Can be switched in parallel without an isolating relay
pluggable connection cable
Overload protection
This tubular motor is exclusively suitable for use in roller shutters and roller doors.
To ensure a long service life, only rust-free, weather- and moisture-resistant materials are used.
Low stress on the curtain and the anchor point through continuous optimization of the anchor forces.
An integrated isolation relay allows multiple motors to be connected in parallel and operated via a controller or switch. The number of motors that can be connected depends on the load capacity of the interface and the fuse rating.
The connecting cable is attached to the motor via a plug connection and is replaceable; it is available in various designs and lengths.
In case of excessive heat generation (e.g., due to continuous operation), a thermal protection switch interrupts the power supply to the motor. Operation is possible again after cooling.
The curtain can wrap around the motor head. It can even be used in the tightest spaces.
Former/Alternative type designations for this engine: R../17PR+, R../17C PR+, R../17C PRO+ (e.g. R8/17C PR+)
Rated torque: 12 Nm
Rated speed: 17 rpm.
Nominal voltage: 230 V
Frequency: 50Hz
Power consumption: 110W
Current consumption: 0.5A
Outer diameter: 45mm
Protection class IP44
Frequency 50Hz
Total length: 528 mm